| ID | 原文 | 译文 |
| 55087 | 最后对协同压制干扰的效果进行了仿真验证,仿真结果表明,该方法能够降低目标发现概率,实现对雷达检测环节的有效干扰。 | Finally has carried on the simulation of the effects of synergy to suppress interference, the simulation results show that the method can reduce the target detection probability, and achieve the effective interference to radar detection link. |
| 55088 | 大量仿真表明,基于幅度和的改进型加权比特翻转(modified sum of the magnitude based weighted bit flipping,MSMWBF)译码算法对于行重/列重较小的低密度奇偶校验(low density parity-check,LDPC)码而言,展现出巨大的性能优势,但对于行重/列重较大的基于有限域几何(finite-geometry,FG)的LDPC码,性能损失严重。 | A large number of simulation show that the improved weighted based on amplitude and bits flip (modified the sum of the magnitude -based weighted bit flipping, MSMWBF) decoding algorithm for small line of heavy/column low density parity check (low density parity check, LDPC) codes, show a significant performance advantages, but for larger line of heavy/column based on the finite field geometry (finite - geometry, FG) of LDPC codes, serious performance loss. |
| 55089 | 首先对此现象进行理论分析。 | First of all for theoretical analysis of this phenomenon. |
| 55090 | 其次,引入附加的偏移项对MSMWBF算法的校验方程可靠度信息进行修正,提高了算法对行重/列重较大的LDPC码的译码性能。 | Second, introduce additional migration law of MSMWBF algorithm corrects the calibration equation of the reliability of information, improve the algorithm of line heavy/column decoding performance of LDPC codes. |
| 55091 | 仿真结果表明,在加性高斯白噪声信道下,误比特率为10-5时,相比于MSMWBF算法,在适度增加实现复杂度的条件下,所提算法可获得约0.63dB的增益。 | The simulation results show that under additive white gaussian noise channel, the bit error rate is 10-5, compared to the MSMWBF algorithm, under the condition of a modest increase in implementation complexity, the proposed algorithm can obtain the gain of about 0. 63 dB. |
| 55092 | 提出了一种高速背板互连的信号完整性仿真方法。 | A high-speed backplane interconnection signal integrity simulation method. |
| 55093 | 高速接插件的厂商只提供参数模型,借助矢量拟合方法可以推导出电路模型,再使用部分元等效电路法仿真走线得到等效电路模型。 | High speed connector manufacturers provide only parameter model, with the help of the vector fitting method can derive the circuit model, using the method of partial element equivalent circuit simulation of equivalent circuit model. |
| 55094 | 推导出联合仿真的方法,实现了高速背板互连的信号完整性仿真。 | The joint simulation method is deduced, and realized high-speed backplane interconnect signal integrity simulation. |
| 55095 | 通过等效电路的仿真结果和厂商提供的原始参数进行的比较,以及部分元等效电路法与商用软件仿真结果的比较验证了等效电路的正确性。 | Through the simulation results of equivalent circuit and vendors, comparison of the original parameters and partial element equivalent circuit method was compared with the commercial software, the simulation results verify the validity of the equivalent circuit. |
| 55096 | 最后对完整的板间互连通道进行了仿真,并将最终的仿真结果与商用软件的仿真结果进行了比较,证明了所提方法的正确性,给出了整个通道眼图仿真分析结果。 | Finally to the complete board interconnection between channels are simulated, and the final simulation results are compared with those of the commercial software of the simulation results, prove the validity of the proposed method, the whole channel eye diagram simulation analysis result was given. |