ID 原文 译文
53207 为合理开采矿产资源和矿区环境保护提供参考依据。 It provides a reference basis for rational exploitation of mineral resources and environmental protection in mining areas.
53208 依据电压比较器高低电平判决的基本原理,结合精确电流采样支路,设计了一种固定限流装置。 With the basic principle of voltage comparator’s judgment for high or low voltage level of combined with accurate current-sampled branch, a constant-current device is designed.
53209 此外,通过第二条电流采样支路,达到返送(foldback)功能,使得短路电流不到最大负载电流的 10%,有效降低了 LDO(Low Drop-out)系统的过流关断功耗。 Furthermore, the function of foldback is achieved by the second current-sampled branch, the short-circuit current is below to the 10% of maximum load current, which effectively reduces the over-current shut-down power dissipation of LDO systems.
53210 基于 CZ6H 0. 35μm 标准 CMOS 工艺,应用 Cadence 工具进行仿真,结果显示,该过流保护电路可以把稳压器的最大输出电流限定在 300mA,输出短路电流不到 20mA,在无片外电容的条件下,系统表现出良好的瞬态响应效果; Based on CZ6H 0. 35m standard CMOS technology, simulated by the use of Cadence tool, the result reveals that the over-current protection circuit can limit the maximum at 300mA and the short-circuit current is below to 20mA. Under the capacitor-free condition, the LDO system shows favorable transient response.
53211 此外,该过流保护模块非常易于调节来适应于不同的标准输出电压。 Otherwise, the overcurrent protection module is extremely easy to adjust to be adapted to variable standard output voltage.
53212 通过对物理不可克隆函数(Physical Unclonable Functions,PUF)电路和电流镜的研究,提出一种基于电流镜的电流型 PUF 电路设计方案。 By researching the Physical Unclonable Functions (PUF) and the current mirror, a current type PUF based on current mirror is proposed.
53213 该方案首先利用多路电流镜产生随机电流, Firstly, multipath currents are generated from multiple current mirrors.
53214 然后使用电流型敏感放大器比较两路电流的大小,最后产生随机的输出响应。 Then, two path currents are chosen as the input of the current type sense amplifier. After comparing the two currents, it outputs a random state.
53215 SMIC 65nm 工艺下,利用全定制方法设计 PUF 电路,在最小尺寸下 PUF 单元的版图面积为 2. 59µm×1. 51µm。 Following the fully custom flow, PUF is designed in SMIC 65nm technology and the minimum layout area of the PUF cell is 2. 59µm×1. 51µm.
53216 通过 Spectre 软件,在不同电压、温度等工作环境下进行 Monte Carlo 仿真验证,分析PUF 电路的识别能力。 The outputs of the PUF are analyzed via Monte Carlo simulations under various supply voltages and temperatures by the tool of Spectre.