ID 原文 译文
23045 仿真实验证明了改进型的频域累积循环自相关算法的有效性,且适用于低信噪比环境。 The simulation results show that, the improved cyclic autocorrelation algorithm is effective in the low signal-to-noise cause.
23046 基于 Synopsys 公司 3D TCAD 器件模拟,该文通过改变 3 种工艺参数,研究 65 nm 体硅 CMOS 工艺下PMOS 晶体管工艺参数变化对静态随机存储器(Static Random Access Memory, SRAM)存储单元翻转恢复效应的影响。 Based on Synopsys TCAD 3-D device simulation, the effects of PMOS transistor process parameters on the upset and recovery effect of Static Random Access Memory (SRAM) memory cell are studied in a 65-nm bulk CMOS technology, mainly by changing the three process parameters.
23047 研究结果表明:降低 PMOS 晶体管的 P+深阱掺杂浓度、N 阱掺杂浓度或调阈掺杂浓度,有助于减小翻转恢复所需的线性能量传输值(Linear Energy Transfer, LET); The simulation results show that reducing the doping concentration of deep-P+-well, N-well and threshold doping concentration in PMOS transistor can decrease the Linear Energy Transfer (LET) value of the upset and recovery.
23048 通过降低 PMOS 晶体管的 P+深阱掺杂浓度和 N 阱掺杂浓度,使翻转恢复时间变长。 By reducing the doping concentration of deep-P+-well and N-well in PMOS transistor, the time of the upset and recovery increases.
23049 该文研究结论有助于优化 SRAM 存储单元抗单粒子效应(Single-Event  Effect,  SEE)设计,并且可以指导体硅 CMOS 工艺下抗辐射集成电路的研究。 The conclusion of this paper is helpful to optimize the design of Static Random Access Memory cell mitigating Single-Event Effect (SEE), and can gives a great guidance for the anti-radiation integrated circuit under bulk CMOS process.
23050 目前对于液冷式速调管收集极的热分析均未考虑到冷却液流动状态对收集极整体的热分布及散热能力的影响。 At present the impact of flow regime on heat distribution and cooling capacity of collectors is not considered in the thermal analysis of the liquid-cooled collectors.
23051 该文介绍了一种大功率速调管收集极散热过程中的流固耦合换热数值分析方法。 The liquid-solid coupled heat transfer simulation method for the collectors of high power klystrons is presented.
23052 ANSYS Workbench 中的 CFX 流体计算软件作为分析平台,对双层水套沟槽型收集极结构进行了适当简化,建立了 3 维参数化实体模型; Using the CFX software in the platform of ANSYS Workbench, the model of the collector with two-layer water jacket and ditch grooves is simplified and established.
23053 仿真分析得到了冷却通道内部流体的 3 维流速分布、温升、压力分布及收集极体温度分布等结果,并与理论计算结果进行了对比,误差在合理范围内,对于速调管大功率微波测试和收集极的优化设计有较大的参考意义。 The velocity distribution, the temperature rise, the pressure distribution of the flow and the temperature distribution on the collector are simulated. The results are contrasted with the theoretical results and the errors are reasonable. These simulation results are meaningful to the microwave high power test of klystrons and the optimal design of collectors.
23054 为解决弹性光网络中多链路故障保护的高保护资源冗余度问题,该文提出一种面向可靠性的多链路故障概率保护与保护资源重配置(ROPP-BR)策略。 Due to the high resource redundancy of full protection for request's multi-link failure in elastic optical networks, a strategy of Reliability Oriented Probability Protection and Backup Reprovisioning (ROPP-BR) is proposed.